The SiI9136-3 transmitter is an HDMI® Deep Colour transmitter with 3D and 4K x 2K support for consumer electronics products such as set-top boxes, Blu-ray players and recorders, A/V Receivers, DVD players and recorders, personal video recorders, home theater-in-a-box systems, and home theater PCs.
The SiI9136-3 transmitter, with the latest generation 300 MHz TMDS™ core, enables home theatre devices to deliver up to 16-bit Deep Colour at 1080p/30 resolutions and up to 12-bit Deep Colour at 1080p/60 resolutions. On the audio side, High-Bitrate (HBR) audio formats (such as Dolby® TrueHD and DTS-HD) are supported for an enhanced digital audio experience.
Supports most common standard and non- standard video input formats
Supports most common 3D formats
Supports video resolutions up to 8-bit 4K (30 Hz), 12-bit 1080p (60 Hz), 12-bit 720p/1080i (120 Hz), and 16-bit 1080p (30 Hz)
DESCRIPTION The DS1609 is a random access 256–byte Dual port memory designed to connect two asyncronous address/data buses together with a common memory element. Both ports have unrestricted access to all 256 bytes of memory, and with modest system discipline no arbitration is required. Each port is controlled by three control signals: output enable, write enable, and port enable. The device is packaged in plastic 24–pin DIP and 24–pin SOIC. Output enable access time of 50 ns is available when operating at 5 volts.
FEATURES • Totally asynchronous 256–byte Dual port memory • Multiplexed address and data bus keeps pin count low • Dual port memory cell allows random access with minimum arbitration • Each port has standard independent RAM control signals • Fast access time • Low power CMOS design • 24–pin DIP or 24–pin SOIC surface mount package • Both CMOS and TTL compatible • Operating temperature of –40°C to +85°C • Standby current of 100 nA @ 25°C makes the device ideal for battery backup or battery operate applications.
DESCRIPTION The IDT7M1014 is a 4K x 36 asynchronous high-speed BiCMOS Dual-port static RAM module constructed on a cofired ceramic substrate using 4 IDT7014 (4K x 9) asynchronous Dual-port RAMs. The IDT7M1014 module is designed to be used as stand-alone 36-bit Dual-port RAM.
FEATURES • High-density 4K x 36 BiCMOS Dual-port Static RAM module • Fast access times — Commercial: 15, 20ns — Military: 25, 30ns • Fully asynchronous read/write operation from either port • Surface mounted LCC packages allow through-hole module to fit on a ceramic PGA footprint • Single 5V (±10%) power supply • Multiple GND pins and decoupling capacitors for maximum noise immunity • Inputs/outputs directly TTL-compatible
DESCRIPTION A high efficiency red and green lamp made of GaAlAs, GaP offering a changing color characteristics dependent on the direction the lamp is biased. These two light emitting diodes are mounted in 3mm Dual color, white diffused lens.
Features & Benefits • High quality and reliability • Exceptional deep discharge recovery • No corrosive gas generation • Long service life • Quick chargeability • High power density • Maintenance-free operation
The IDT7M1002 is a 16K x 32 high-speed CMOS Dual-port Static RAM Module constructed on a co-fired ceramic substrate using four 16K x 8 (IDT7006) Dual-port Static RAMs in surface-mounted LCC packages. The IDT7M1002 module is designed to be used as stand-alone 512K Dual-port RAM or as a combination Master/Slave Dual-port RAM for 64-bit or more word width systems. Using the IDT Master/Slave approach in such system applications results in full-speed, error free operation without the need for additional discrete logic.
• High-density 512K CMOS Dual-port RAM module
• Fast access times
—Commercial: 30, 35ns
—Military: 40, 45ns
• Fully asynchronous read/write operation from either port
• Easy to expand data bus width to 64 bits or more using the Master/Slave function
• Separate byte read/write signals for byte control
• On-chip port arbitration logic
• INT flag for port-to-port communication
• Full on-chip hardware support of semaphore signaling between ports
• Surface mounted fine pitch (25 mil) LCC packages allow through-hole module to fit into 121 pin PGA footprint
The ADV7619 is a high quality, two input, one output (2:1) multiplexed High-Definition Multimedia Interface (HDMI®) receiver. The ADV7619 is offered in professional (no HDCP keys) and commercial versions. The operating temperature range is 0°C to 70°C.
The ADV7619 incorporates a Dual input HDMI-capable receiver that supports all mandatory 3D TV formats defined in the HDMI 1.4a specification, HDTV formats up to 1080p 36-bit Deep Color/2160p 8-bit, and display resolutions up to 4k× 2k (3840 × 2160 at 30 Hz). It integrates an HDMI CEC controller that supports the capability discovery and control (CDC) feature.
The ADV7619 incorporates Xpressview™ fast switching on both input HDMI ports. Using the Analog Devices, Inc., hardware based HDCP engine to minimize software overhead, Xpressview
technology allows fast switching between both HDMI input ports in less than 1 sec.
High-Definition Multimedia Interface (HDMI®) 1.4a features supported
All mandatory and additional 3D video formats supported Extended colorimetry, including sYCC601, Adobe® RGB, Adobe YCC601, xvYCC extended gamut color CEC 1.4-compatible
HDMI 3 GHz receiver
297 MHz maximum TMDS clock frequency
Supports 4k × 2k resolution
Xpressview fast switching of HDMI ports
Up to 48-bit Deep Color with 36-/30-/24-bit support
High-bandwidth Digital Content Protection (HDCP) 1.4 support with internal HDCP keys
HDCP repeater support: up to 127 KSVs supported
Integrated CEC controller
Programmable HDMI equalizer
5 V detect and Hot Plug assert for each HDMI port
Audio support including high bit rate (HBR) and Direct Stream Digital (DSD)
S/PDIF (IEC 60958-compatible) digital audio support
Supports up to four I2S outputs
Advanced audio mute feature
Dedicated, flexible audio output port
Super Audio CD® (SACD) with DSD output interface
DTS-HD Master Audio™
Interrupt controller with 2 interrupt outputs
Standard identification (STDI) circuit
Highly flexible, 48-bit pixel output interface
36-bit output for resolutions up to 1080p Deep Color
2 × 24-bit pass-through outputs for HDMI formats greater than 2.25 GHz
Internal EDID RAM
Any-to-any, 3 × 3 color space conversion (CSC) matrix