A25L40P Series
Preliminary
4 Mbit, Low Voltage, Serial Flash Memory
With 85MHz SPI Bus Interface
FEATURES
4 Mbit of Flash Memory
Flexible Sector Architecture (4/4/8/16/32)KB/64x7 KB
Bulk Erase (4 Mbit) in 6s (typical)
Sector Erase (512 Kbit) in 1s (typical)
Page Program (up to 256 Bytes) in 3ms (typical)
2.7 to 3.6V Single Supply Voltage
SPI Bus Compatible Serial Interface
85MHz Clock Rate (maximum)
Deep Power-down Mode 1µA (typical)
Top or Bottom boot block configuration available
Electronic Signatures
- JEDEC Standard two-Byte Signature (2013h)
- RES Instruction, One-Byte, Signature (12h), for backward
compatibility
Package options
- 8-pin SOP (150mil or 209mil), 16-pin SOP, 8-pin DIP
(300mil) or 8-pin QFN
- All Pb-free (Lead-free) products are RoHS compliant
GENERAL DESCRIPTION
The A25L40P is a 4 Mbit (512K x 8) Serial Flash Memory, with
advanced write protection mechanisms, accessed by a high
speed SPI-compatible bus.
The memory can be programmed 1 to 256 bytes at a time, using
the Page Program instruction.
The memory is organized as 8 sectors, each containing 256
pages. Each page is 256 bytes wide. Thus, the whole memory
can be viewed as consisting of 2048 pages, or 524,288 bytes.
The whole memory can be erased using the Bulk Erase
instruction, or a sector at a time, using the Sector Erase
instruction.
Pin Configurations
SO8 Connections
SO16 Connections
A25L40P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
A25L40P
HOLD 1 16 C
VCC 2 15 D
DU 3 14 DU
DU 4 13 DU
DU 5 12 DU
DU 6 11 DU
S 7 10 VSS
Q8 9 W
DIP8 Connections
Note:
DU = Do not Use
QFN8 Connections
A25L40P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
A25L40P
S1
Q2
W3
VSS 4
8 VCC
7 HOLD
6C
5D
PRELIMINARY (May, 2007, Version 0.4)
1
AMIC Technology Corp.