Connecting to the SPI bus
M95160 M95160-W M95160-R M95160-DF
4.1
SPI modes
These devices can be driven by a microcontroller with its SPI peripheral running in either of
the following two modes:
• CPOL=0, CPHA=0
• CPOL=1, CPHA=1
For these two modes, input data is latched in on the rising edge of Serial Clock (C), and
output data is available from the falling edge of Serial Clock (C).
The difference between the two modes, as shown in Figure 6, is the clock polarity when the
bus master is in Stand-by mode and not transferring data:
• C remains at 0 for (CPOL=0, CPHA=0)
• C remains at 1 for (CPOL=1, CPHA=1)
CPOL CPHA
Figure 6. SPI modes supported
00
C
11
C
D
MSB
Q
MSB
AI01438B
12/47
DocID022580 Rev 4