ADNS-2030
HDNS-2100
Z
OBJECT SURFACE
Figure 9. Distance from lens reference plane to surface.
AC Electrical Specifications
Electrical Characteristics over recommended operating conditions. Typical values at 25°C, VDD = 3.3 V, 18 MHz, 1500 fps.
Parameter
Symbol Min. Typ. Max. Units Notes
Power Down
tPD
700
µs
From PD ↑
Time uncertainty due to firmware delay
(Refer to Figure 11).
Power Up from PD ↓
tPUPD
50
ms
From PD ↓ to valid quad signals
705 µsec + 75 frames (Refer to Figure 11).
Power Up from VDD ↑
tPU
30
ms
From VDD ↑ to valid quad signals
705 µsec + 40 frames
Rise and Fall Times
SDIO
tr
tf
XA, XB, YA, YB
tr
tf
ILED
tr
between
tf
between
15
ns
CL = 30 pF (the rise time is between 10% to 90%)
12
ns
CL = 30 pF (the fall time is between 10% to 90%)
30
ns
CL = 30 pF (the rise time is between 10% to 90%)
22
ns
CL = 30 pF (the fall time is between 10% to 90%)
35
ns
With HLMP-ED80-XXXXX LED (the rise time is
10% to 90%).
170
ns
With HLMP-ED80-XXXXX LED (the fall time is
10% to 90%).
Serial Port Transaction Timer
tSPTT
0.7
0.9
1.0
s
Serial port will reset if current transaction is not
complete within tSPTT (Refer to Figure 35).
Transient Supply Current
IDDT
18
37
mA
Max supply current during a VDD ramp from 0 to 3.3V
with > 500 ms rise time. Does not include charging
current for bypass capacitors.
8