LC72323-XXXX 데이터 시트보기 (PDF) - SANYO -> Panasonic

부품명

상세내역

제조사

LC72323-XXXX

Provisional development specification

SANYO -> Panasonic 

LC72323-XXXX

12. CD

When this key is pressed, the CD display is turned on and the LC75371M input switching control data is changed to

specify CD mode. If this key is pressed again, CD mode is cleared, the CD display is turned off and the LC75371M

input switching control data is changed to the last mode.

If this key is pressed when HOLD is high, CD mode is entered with highest priority. After CD mode is turned on, CD

mode is not cleared by HOLD going from high to low to high, or by the power going from on to off to back on again.

13. DISP

This key is used to change the display for each mode when the clock function is enabled (when the diode matrix

CLOCK setting is 0).

Mode

DIMRX “PRIORITY” = 0 (Clock display takes priority)

RADIO

mode

Press DISP

Clock display

* RADIO key

Press DISP after 5 seconds

Frequency display

Clock display

Five seconds after

operation is complete

Frequency display

* RADIO key

MAN UP/T UP MAN DN/T DN STEREO SEEK UP SEEK DN

SCAN UP PS/AMEM M1 to M16 VF BAND LOCAL

TAPE

mode

Press DISP

Clock display

Tape display

DISP after 5 seconds

Clock display

• During tape input, tape display is performed for 5 seconds.

DIMRX “PRIORITY” = 1

Frequency display

Press

DISP

Clock display

DISP

after 5 seconds

Frequency display

However, note that if a radio key is

pressed during clock display, the

LC72323-XXXX returns to frequency

display even if the 5 seconds have not

elapsed.

Frequency display

Press

DISP

Clock display

DISP

after 5 seconds

Frequency display

CD

mode

Press DISP

Clock display

CD display

DISP after 5 seconds

Clock display

• During CD input, CD display is performed for 5 seconds.

CD display

Press

DISP

Clock display

DISP

after 5 seconds

CD display

VF

mode

During tape or CD input

SK search

SK = “H”

DK = “L”

Frequency display

After 5 seconds

Tape or CD display

Clock display

DK on

After 5 seconds

SK search

Frequency display

DK = “H”

SK = “L”

DK = “L”

Tape or CD display

• DISP + MAN UP/T UP

When the clock is displayed, pressing these keys at the same time adjusts the minutes setting. Each time the keys

are pressed the setting is incremented by 1 minute, and if they are held down together for over 500 ms, the minutes

setting slews at 8 minutes per second. The seconds setting is reset to 0 by these operations. There is no carry out of

the minutes into the hours.

No. 4934-15/27

Share Link: