CHAPTER 1 OUTLINE
(2/2)
Item
µPD78F0544
µPD78F0545
µPD78F0546
µPD78F0547
µPD78F0547D
Serial interface
• UART supporting LIN-bus:
1 channel
• 3-wire serial I/O/UARTNote:
1 channel
• 3-wire serial I/O:
1 channel
• 3-wire serial I/O with automatic transmission/reception function: 1 channel
• I2C bus:
1 channel
Multiplier/divider
• 16 bits × 16 bits = 32 bits (multiplication)
• 32 bits ÷ 16 bits = 32 bits remainder of 16 bits (division)
Vectored
Internal
20
interrupt sources External
9
Key interrupt
Key interrupt (INTKR) occurs by detecting falling edge of key input pins (KR0 to KR7).
Reset
• Reset using RESET pin
• Internal reset by watchdog timer
• Internal reset by power-on-clear
• Internal reset by low-voltage detector
On-chip debug function
None
Provided
Power supply voltage
Operating ambient temperature
Package
VDD = 1.8 to 5.5 V
• TA = −40 to +85°C ((T), (R), (S) products)
• TA = −40 to +125°C ((T2) product)
• 80-pin plastic LQFP (14 × 14)
• 80-pin plastic LQFP (12 × 12)
Note Select either of the functions of these alternate-function pins.
An outline of the timer is shown below.
16-Bit Timer/
Event Counters
00 and 01
8-Bit Timer/
Event Counters
50 and 51
8-Bit Timers H0 and H1 Watch Timer Watchdog
Timer
Function Interval timer
TM00
TM01
TM50
TM51
TMH0
TMH1
1 channel 1 channel 1 channel 1 channel 1 channel 1 channel 1 channelNote 1
−
External event
1 channel 1 channel 1 channel 1 channel
−
−
−
−
counter
PPG output
1 output 1 output
−
−
−
−
−
−
PWM output
−
−
1 output 1 output 1 output 1 output
−
−
Pulse width
2 inputs 2 inputs
−
−
−
−
−
−
measurement
Square-wave
1 output 1 output 1 output 1 output 1 output 1 output
−
−
output
Carrier generator
−
−
−
−
−
1 outputNore 2
−
−
Timer output
−
−
−
−
−
−
1 channelNore 1
−
Watchdog timer
−
−
−
−
−
−
−
1 channel
Interrupt source
2
2
1
1
1
1
1
−
Notes 1. In the watch timer, the watch timer function and interval timer function can be used simultaneously.
2. TM51 and TMH1 can be used in combination as a carrier generator mode.
Preliminary User’s Manual U17397EJ2V1UD
27