STP100-50 데이터 시트보기 (PDF) - Unspecified
부품명
상세내역
제조사
STP100-50 Datasheet PDF : 4 Pages
| |||
STP100, STP101
Immersion pipe temperature sensor
NTC 1.8 kohm
STP100 / STP101 is designed for immersion mounting
in pipe systems with a separate pocket (well). The
pocket is closed in the bottom, making it easy to
replace the sensor, if necessary.
STP100 housing is equipped with a Pg11 cable fitting.
STP101 housing has a ∅ 20 mm (0.79 in.) plugged
hole for the cable.
The pocket has to be ordered separately, see
Accessories.
D-12-41
16 Feb 2005
TECHNICAL SPECIFICATION
Part number ........................................................... see table
Sensor element ............... NTC, 1.8 kohm at +25 °C (77 °F)
Time constant without pocket in water ............... approx. 7 s
Time constant with pocket in water:
Pocket type
Brass PN16
Stainless steel PN25
With
Contact past
19 s
20 s
Without
Contact past
23 s
24 s
Materials:
Immersion tube .......................................... stainless steel
Connection box ..................................... polyamide plastic
Enclosure rating ........................................................... IP 65
Dimensions (in mm) ................ according to figure and table
Accuracy .................................................. see table overleaf
Ambient temperature ........................... min. -40 °C (-40 °F)
max. +130 °C (+266 °F)
Operating temperature ........................ min. -40 °C (-40 °F)
max. +150 °C (+302 °F)
Standards:
EMC ......................................... EN 50081-1, EN 50082-1
Dimensions mm (inches)
64x58 (2.52x2.28")
M16x1,5
STP101
No fitting but
O 20 mm
plugged hole
Ø6
(0.23")
Subject to modification.
1 (4)
0-003-2864-1 (EN)
Share Link: 