Technical Note of LA76818
2002/01/23
PIN 3 (IF AGC Filter)
This is 1st AGC filter pin. The signal, which is peak detected by the AGC
detector, is smoothed by the external capacitor and become to AGC voltage. The 2nd
AGC filter is also built-in into IC. The value of C1 is depending on the speed of AGC,
sag etc, and the recommend value is about 0.022uF.
If the BUS of IF AGC is set as ‘1’, the gain of PIF is set minimally.
Vcc
2nd
AGC Filter
IF AGC
defeat
3
C1
The circumference circuit of pin 3
17/ 46