深圳市天微电子有限公司
SHENZHEN TI TAN M I CRO ELECTRONI CS CO. , LTD.
Data 1 to n : Transfer Display Data (14 Bytes max.)
Command 4: Display Control Command
The following diagram shows the waveforms when updating specific
addresses.
Command1: Data Setting Command
Command2: Address Setting Command
Data : Display Data
RECOMMENDED SOFTWARE PROGRAMMING
FLOWCHART
Note: 1. Command 1: Display Mode Commands
2. Command 2: Data Setting Commands
3. Command 3: Address Setting Commands
4. Command 4 : Display Control Commands
5. When IC power is applied for the first time, the contents of the Display
RAM is not defined; thus, it is strongly suggested that the contents of the
Display RAM must be cleared during the initial setting.
Add:522,5/F,Bldg. No.4,Keji Central Road 2, Software Park,High-Tech Industrial Park,Shenzhen
Tel:86-755-86185092
Fax: 86-755-86185093
Web: www.titanmec.com
9