SAF-C167CR-16RM 데이터 시트보기 (PDF) - Siemens AG

부품명

상세내역

제조사

SAF-C167CR-16RM

16-Bit CMOS Single-Chip Microcontrollers

Siemens AG 

20Dec96@09:25h Intermediate Version

C167CR-16RM

Absolute Maximum Ratings

Ambient temperature under bias (TA):

SAB-C167CR-16RM ........................................................................................................0 to +70 °C

SAF-C167CR-16RM .................................................................................................... –40 to +85 °C

SAK-C167CR-16RM .................................................................................................. –40 to +125 °C

Storage temperature (TST)......................................................................................... – 65 to +150 °C

Voltage on VCC pins with respect to ground (VSS) ....................................................... –0.5 to +6.5 V

Voltage on any pin with respect to ground (VSS) ...................................................–0.5 to VCC +0.5 V

Input current on any pin during overload condition .................................................... –10 to +10 mA

Absolute sum of all input currents during overload condition ..............................................|100 mA|

Power dissipation..................................................................................................................... 1.5 W

Note: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent

damage to the device. This is a stress rating only and functional operation of the device at

these or any other conditions above those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for extended

periods may affect device reliability. During overload conditions (VIN>VCC or VIN<VSS) the

voltage on pins with respect to ground (VSS) must not exceed the values defined by the

Absolute Maximum Ratings.

Parameter Interpretation

The parameters listed in the following partly represent the characteristics of the C167CR-16RM and

partly its demands on the system. To aid in interpreting the parameters right, when evaluating them

for a design, they are marked in column “Symbol”:

CC (Controller Characteristics):

The logic of the C167CR-16RM will provide signals with the respective timing characteristics.

SR (System Requirement):

The external system must provide signals with the respective timing characteristics to the C167CR-

16RM.

37

Semiconductor Group

Share Link: