28F004B5 데이터 시트보기 (PDF) - Intel

부품명

상세내역

제조사

28F004B5

SMART 5 BOOT BLOCK FLASH MEMORY FAMILY 2, 4, 8 MBIT

Intel 

SMART 5 BOOT BLOCK MEMORY FAMILY

E

5.0 ELECTRICAL SPECIFICATIONS

5.1 Absolute Maximum Ratings*

Commercial Operating Temperature

During Read/Erase/Program...... 0 °C to +70 °C

Temperature Under Bias ....... –10 °C to +80 °C

Extended Operating Temperature

During Read/Erase/Program.. –40 °C to +85 °C

Temperature Under Bias ....... –40 °C to +85 °C

Storage Temperature................. –65 °C to +125 °C

Voltage on Any Pin

(except VCC, VPP, A9 and RP#)

with Respect to GND ........... –2.0 V to +7.0 V(2)

Voltage on Pin RP# or Pin A9

with Respect to GND ....... –2.0 V to +13.5 V(2,3)

VPP Program Voltage with Respect

to GND during Block Erase

and Word/Byte Program .. –2.0 V to +14.0 V(2,3)

VCC Supply Voltage

with Respect to GND ........... –2.0 V to +7.0 V(2)

Output Short Circuit Current....................100 mA (4)

NOTICE: This document contains information on products in

the sampling and initial production phases of development.

The specifications are subject to change without notice.

Verify with your local Intel Sales office that you have the

latest datasheet before finalizing a design.

* WARNING: Stressing the device beyond the "Absolute

Maximum Ratings" may cause permanent damage. These

are stress ratings only. Operation beyond the "Operating

Conditions" is not recommended and extended exposure

beyond the "Operating Conditions" may effect device

reliability.

1. Operating temperature is for commercial product

defined by this specification.

2. Minimum DC voltage is –0.5 V on input/output pins.

During transitions, this level may undershoot to –2.0 V

for periods

<20 ns. Maximum DC voltage on input/output pins is

VCC + 0.5 V which, during transitions, may overshoot to

VCC + 2.0 V for periods <20 ns.

3. Maximum DC voltage on VPP may overshoot to +14.0 V

for periods <20 ns. Maximum DC voltage on RP# or A9

may overshoot to 13.5 V for periods <20 ns.

4. Output shorted for no more than one second.No more

than one output shorted at a time.

5.2 Operating Conditions

Symbol

Parameter

Notes

Min

TA

Commercial Operating Temperature

0

Extended Operating Temperature

-40

VCC

5 V VCC Supply Voltage (10%)

1

4.50

5 V VCC Supply Voltage (5%)

2

4.75

VPP

5 V VPP Supply Voltage (10%)

1

4.50

12 V VCC Supply Voltage (5%)

1

11.4

NOTES:

1. 10% VCC specifications apply to the standard test configuration (Figures 12 and 13).

2. 5% VCC specifications apply to the high-speed test configuration (Figures 11 and 13).

Max

Units

+70

°C

+85

°C

5.50

Volts

5.25

Volts

5.50

Volts

12.6

Volts

26

ADVANCE INFORMATION

Share Link: