READ TIMING WAVEFORMS
VIH
Addresses
VIL
VIH
CE
VIL
WE
VIH
VIL
OE
VIH
VIL
Outputs
VOH HIGH Z
VOL
MX29F400T/B
ADD Valid
tCE
tOE
tACC
tDF
tOH
DATA Valid
HIGH Z
COMMAND PROGRAMMING/DATA PROGRAMMING/ERASE OPERATION
DC CHARACTERISTICS TA = 0oC to 70oC, -40oC to 125oC, VCC = 5V ± 10%
SYMBOL
PARAMETER
MIN. TYP MAX. UNIT CONDITIONS
ICC1 (Read) Operating VCC Current
40 mA IOUT=0mA, f=5MHz
ICC2
50 mA IOUT=0mA, F=10MHz
ICC3 (Program)
50 mA In Programming
ICC4 (Erase)
50 mA In Erase
ICCES
VCC Erase Suspend Current
2
mA CE=VIH, Erase Suspended
NOTES:
1. VIL min. = -0.6V for pulse width is equal to or less
than 20ns.
2. If VIH is over the specified maximum value, program-
ming operation cannot be guranteed.
3. ICCES is specified with the device de-selected. If
the device is read during erase suspend mode, cur-
rent draw is the sum of ICCES and ICC1 or ICC2.
4. All current are in RMS unless otherwise noted.
P/N:PM0439
REV. 1.6, NOV. 12, 2001
19