ESD7016, SZESD7016
ESD Protection Diode
Low Capacitance, USB 3.0
The ESD7016 surge protection is specifically designed to protect
USB3.0 interfaces by integrating two Superspeed pairs, D+, D−, and
Vbus lines into a single protection product. Ultra−low capacitance and
low ESD clamping voltage make this device an ideal solution for
protecting voltage sensitive high speed data lines. The flow−through
style package allows for easy PCB layout and matched trace lengths
necessary to maintain consistent impedance between high speed
differential lines.
Features
• Low Capacitance (0.15 pF Typical, I/O to GND)
• Protection for the Following IEC Standards:
IEC 61000−4−2 (Level 4)
• Low ESD Clamping Voltage
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• This is a Pb−Free Device
Typical Applications
• USB 3.0
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
−55 to +125 °C
Storage Temperature Range
Tstg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
TL
260
°C
IEC 61000−4−2 Contact (ESD)
IEC 61000−4−2 Air (ESD)
ESD
ESD
±15
kV
±15
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
www.onsemi.com
MARKING
DIAGRAM
UDFN8
CASE 517CB
1
6M MG
G
6M = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
I/O 2
N/C
Vbus or Ground
I/O 3
I/O 4
N/C
I/O 5
I/O 6
ORDERING INFORMATION
Device
Package
Shipping
ESD7016MUTAG
UDFN8 3000 / Tape &
(Pb−Free)
Reel
SZESD7016MUTAG UDFN8 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
1
October, 2017 − Rev. 4
Publication Order Number:
ESD7016/D