AD569 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD569 Datasheet PDF : 12 Pages
| |||
AD569
ABSOLUTE MAXIMUM RATINGS*
(TA = +25°C unless otherwise noted)
+VS (Pin 1) to GND (Pin 18) . . . . . . . . . . . . . . +18 V, –0.3 V
–VS (Pin 28) to GND (Pin 18) . . . . . . . . . . . . . . –18 V, +0.3 V
+VS (Pin 1) to –VS (Pin 28) . . . . . . . . . . . . . . . +26.4 V, –0.3 V
Digital Inputs
(Pins 4-14, 19-27) to GND (Pin 18) . . . . . . . . . +VS, –0.3 V
+VREF Force (Pin 3) to +VREF Sense (Pin 2) . . . . . . . . ± 16.5 V
–VREF Force (Pin 15) to –VREF Sense (Pin 16) . . . . . . . ± 16.5 V
VREF Force (Pins 3, 15) to GND (Pin 18) . . . . . . . . . . . . . ± VS
VREF Sense (Pins 2, 16) to GND (Pin 18) . . . . . . . . . . . . . ± VS
VOUT (Pin 17) . . . . . . . . . . . . . . . . . . Indefinite Short to GND
. . . . . . . . . . . . . . . . . . . . . . . . Momentary Short to +VS, –VS
Power Dissipation (Any Package) . . . . . . . . . . . . . . . 1000 mW
Operating Temperature Range
Commercial Plastic (JN, KN, JP, KP Versions) 0°C to +70°C
Industrial Ceramic (AD, BD Versions) . . . . –25°C to +85°C
Extended Ceramic (SD Versions) . . . . . . . –55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 10 secs) . . . . . . . +300°C
*Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational sections of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
ESD SENSITIVITY
The AD569 features input protection circuitry consisting of large “distributed” diodes and polysilicon
series resistors to dissipate both high-energy discharges (Human Body Model) and fast, low-energy
pulses (Charged Device Model). Per Method 3015.2 of MIL-STD-883C, the AD569 has been
classified as a Category A device.
Proper ESD precautions are strongly recommended to avoid functional damage or performance
degradation. Charges as high as 4000 volts readily accumulate on the human body and test equipment
and discharge without detection. Unused devices must be stored in conductive foam or shunts, and
the foam should be discharged to the destination socket before devices are removed. For further
information on ESD precautions, refer to Analog Devices’ ESD Prevention Manual.
WARNING!
ESD SENSITIVE DEVICE
PIN DESIGNATIONS
ORDERING GUIDE
Model1
AD569JN
AD569JP
AD569KN
AD569KP
AD569AD
AD569BD
AD569SD
Integral Nonlinearity
+25؇C
TMIN–TMAX
± 0.04%
± 0.04%
± 0.024%
± 0.024%
± 0.04%
± 0.024%
± 0.04%
± 0.04%
± 0.04%
± 0.024%
± 0.024%
± 0.04%
± 0.024%
± 0.04%
Differential Nonlinearity
+25؇C
TMIN–TMAX
± 1 LSB
± 1 LSB
± 1/2 LSB
± 1/2 LSB
± 1 LSB
± 1/2 LSB
± 1 LSB
± 1 LSB
± 1 LSB
± 1 LSB
± 1 LSB
± 1 LSB
± 1 LSB
± 1 LSB
Temperature
Range
0°C to +70°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
–25°C to +85°C
–25°C to +85°C
–55°C to +125°C
Package
Option2
N-28
P-28A
N-28
P-28A
D-28
D-28
D-28
NOTES
1For details on grade and package offerings screened in accordance with MIL-STD-883, refer to the Analog Devices Military Products Databook
or current AD569/883B data sheet.
2D = Ceramic DIP; N = Plastic DIP; P = Plastic Leaded Chip Carrier.
–4–
REV. A
Share Link: 