TEA1530AT 데이터 시트보기 (PDF) - Philips Electronics

부품명

상세내역

제조사

TEA1530AT

GreenChip™II SMPS control IC

Philips Electronics 

Philips Semiconductors

TEA1530AT

GreenChip™II SMPS control IC

Iss

0.5 V

start-up

6 SENSE Rss

Vocp

Css

Rsense

Fig 7. Soft start-up

mgu237

7.14 Driver

The driver circuit to the gate of the power MOSFET has a current sourcing capability of

typically 150 mA and a current sink capability of typically 500 mA at VCC of 9.5 V. At

VCC = 15 V, the current sourcing capability is typically 250 mA and the current sink

capability typically 0.7 A. This permits fast turn-on and turn-off of the power MOSFET for

efficient operation.

A low driver source current has been chosen to limit the ∆V/∆t at switch-on. This reduces

Electro Magnetic Interference (EMI) and also limits the current spikes across Rsense.

8. Limiting values

Table 3: Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). All voltages are measured

with respect to ground (pin 2); positive currents flow into the chip; pin VCC may not be current driven.

The voltage ratings are valid provided other ratings are not violated; current ratings are valid

provided the maximum power rating is not violated.

Symbol Parameter

Conditions

Min

Max Unit

Voltages

VCC

VPROTECT

VCTRL

VSENSE

VDRAIN

Currents

supply voltage

voltage on pin PROTECT

voltage on pin CTRL

voltage on pin SENSE

voltage on pin DRAIN

continuous

continuous

current limited

−0.4

+20

V

−0.4

+5

V

−0.4

+5

V

−0.4

-

V

−0.4

+650 V

ICTRL

ISENSE

IDRIVER

IDRAIN

General

current on pin CTRL

current on pin SENSE

current on pin DRIVER

current on pin DRAIN

d < 10 %

d < 10 %

-

50

mA

−1

+10

mA

−0.8

+2

A

-

5

mA

Ptot

total power dissipation

Tamb < 70 °C

SO8 package

-

0.5

W

Objective data sheet

Rev. 01 — 18 May 2005

© Koninklijke Philips Electronics N.V. 2005. All rights reserved.

9 of 22

Share Link: