RTL8211E/RTL8211EG
Datasheet
6.9. Regulator and Reference
Pin No.
(48-pin)
39
Pin No.
(64-pin)
58
Pin Name
RSET
44, 45
48
64
VDDREG
3
REG_OUT
3
7
AVDD10
38
57 ENSWREG
Table 9. Regulator and Reference
Type Description
O
Reference.
External Resistor Reference.
P
Analog 3.3V Power Supply for Switching Regulator.
O
Switching Regulator 1.05V Output.
Connect to a 2.2µH or 4.7µH inductor.
P
Feedback Pin for Switching Regulator.
I
3.3V: Enable switching regulator
0V: Disable switching regulator
6.10. Power and Ground
Pin No.
(48-pin)
37
15, 21
Pin No.
(64-pin)
49
20, 26, 37
Pin Name
DVDD33
DVDD33
28, 36
6, 41
44,45
3, 9, 40
47
33, 48
10, 60
64
7, 13, 59
2, 4, 63
DVDD10
AVDD33
VDDREG
AVDD10
GND
Table 10. Power and Ground
Type Description
P Digital Power 3.3V.
P Digital IO Power (3.3/2.5/1.8/1.5V)
Connect to 3.3V for 3.3V RGMII I/O (RTL8211E/EG-VB) & GMII I/O
(RTL8211EG-VB).
Connect to 2.5V for 2.5V RGMII I/O (RTL8211E/EG-VB) & GMII I/O
(RTL8211EG-VB).
Connect to 1.5/1.8V for 1.5/1.8V RGMII I/O (RTL8211E-VL).
P Digital Power. 1.05V.
P Analog Power. 3.3V.
P Analog 3.3V Power Supply for Switching Regulator.
P Analog Power. 1.05V.
G Ground.
Exposed Pad (E-Pad) is Analog and Digital Ground (see section 11
Mechanical Dimensions, page 66).
6.11. Not Connected
Pin No.
(48-pin)
12
Pin No.
(64-pin)
16, 17
Pin Name
NC
Table 11. Not Connected
Type Description
- Not Connected.
Integrated 10/100/1000M Ethernet Transceiver
12
Track ID: JATR-3375-16 Rev. 1.6