ST7066 데이터 시트보기 (PDF) - Unspecified

부품명

상세내역

제조사

ST7066

Dot Matrix LCD Controller/Driver

Unspecified 

ST7066

Reset Function

Initializing by Internal Reset Circuit

An internal reset circuit automatically initializes the ST7066 when the power is turned on. The

following instructions are executed during the initialization. The busy flag (BF) is kept in the busy state

until the initialization ends (BF = 1). The busy state lasts for 10 ms after VCC rises to 4.5 V.

1. Display clear

2. Function set:

DL = 1; 8-bit interface data

N = 0; 1-line display

F = 0; 5 ´ 8 dot character font

3. Display on/off control:

D = 0; Display off

C = 0; Cursor off

B = 0; Blinking off

4. Entry mode set:

I/D = 1; Increment by 1

S = 0; No shift

Note:

If the electrical characteristics conditions listed under the table Power Supply Conditions Using

Internal Reset Circuit are not met, the internal reset circuit will not operate normally and will fail

to initialize the ST7066. For such a case, initialization must be performed by the MPU as

explain by the following figure.

V1.2

18

2000/6/13

Share Link: