KA8301
Application Information
1. FORWARD AND REVERSE CONTROL LOGIC
Pin #5
L (0.7V ↓)
L (0.7V ↓)
H (2.0V ↑)
H (2.0V ↑)
Pin #6
L (0.7V ↓)
H (2.0V ↑)
L (0.7V ↓)
H (2.0V ↑)
Pin #2
L
L
H
H
Pin #10
L
H
L
H
Function
Brake
Reverse
Forward
Brake
• If pin #5=H, pin #6=L, load current flows from pin #2 to pin #10 through a motor.
• If pin #5=L, pin #6=H, load current flows from pin #10 to pin #2 through a motor.
• If pin #5=pin #6=L or pin #5=pin #6=H, the KA8301 stops supplying the power to motor while absorbing counter EMF
from the motor as a brake.
2. RUSH CURRENT RESTRICTING CIRCUIT
If a high voltage generated during reversing operation is applied across pin #2 and pin #10, an internal comparator activates
the rush current restricting circuit.
3. DRIVE CIRCUIT
In the forward mode, the drive circuit supplies a load current to the motor from pin #2 to pin #10.
In the reverse mode, it supplies the current from pin #10 to pin #2.
The output voltage (VOUT) applied to the motor is given by the followings;
VOUT = VZD − VCE(sat), where VZD: a zener voltage applied to pin #4
If pin #4 is left open, the output voltage is given by the followings;
VOUT = VCC1 − VCE(sat, pnp) − 2VF − VCE(sat)
8