29F1610A 데이터 시트보기 (PDF) - Macronix International
부품명
상세내역
제조사
29F1610A Datasheet PDF : 39 Pages
| |||
MX29F1610A
DC CHARACTERISTICS = 0°C to 70°C, VCC = 5V±10%(CONTINUE P.21)
NOTES:
1. All currents are in RMS unless otherwise noted. Typical values at VCC = 5.0V, T = 25°C. These currents are valid for all product
versions (package and speeds).
2. ICC3 is specified with the device de-selected. If the device is read while in erase suspend mode, current draw is the sum of ICC3
and ICC1/2.
3. VIL min. = -1.0V for pulse width is equal to or less than 50ns.
VIL min. = -2.0V for pulse width is equal to or less than 20ns.
4. VIH max. = VCC + 1.5V for pulse width is equal to or less than 20ns. If VIH is over the specified maximum value, read operation
cannot be guaranteed.
AC CHARACTERISTICS READ OPERATIONS
SYMBOL DESCRIPTIONS
29F1610A-90 29F1610A-10 29F1610A-12
MIN. MAX. MIN. MAX. MIN. MAX. UNIT CONDITIONS
tACC
Address to Output Delay
90
100
120 ns
CE=OE=VIL
tCE
CE to Output Delay
90
100
120 ns
OE=VIL
tOE
OE to Output Delay
50
55
60
ns
CE=VIL
tDF
OE High to Output Delay 0
35
0
55
0
55
ns
CE=VIL
tOH
Address to Output hold
0
0
0
ns
CE=OE=VIL
tBACC
BYTE to Output Delay
90
100
120 ns
CE= OE=VIL
tBHZ
BYTE Low to Output in High Z
50
55
55
ns
CE=VIL
tDPR
Deep Power-Down Recovery
0
0
0
ns
TEST CONDITIONS:
• Input pulse levels: 0.45V/2.4V
• Input rise and fall times: 10ns
• Output load: 1TTL gate+100pF(Including scope and jig)
• Reference levels for measuring timing: 0.8V, 2.0V
NOTE:
1. tDF is defined as the time at which the output achieves the
open circuit condition and data is no longer driven.
P/N: PM0506
REV.1.7, JUN. 15, 2001
21
Share Link: 