Data Sheet
Part Number 880370
710 MHz BAW Filter
Electrical Specifications (1)
Operating Temperature Range: (2)
-40 to +85 oC
Parameter (3)
Center Frequency
Insertion Loss @ Fo
3 dB Bandwidth (4)
50 dB Lower Frequency Edge
50 dB Upper Frequency Edge
VSWR @ Fo +/- 5MHz
Source Impedance
Load Impedance
Minimum
705
-
18
640
-
-
-
-
Typical
710
2.5
21
-
-
1.8
50
50
Maximum
715
4
-
-
780
2.25:1
-
-
Unit
MHz
dB
MHz
MHz
MHz
Ω
Ω
Notes:
1. All specifications are based on the test circuit shown below
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Referenced to the insertion loss at center frequency
Test Circuit:
50 Ω
Single-ended
Input
I/O
I/O
50Ω
50Ω
GND
50 Ω
Single-ended
Output
Subject to change or obsolescence without notice
Rev A
July-2007
Page 2 of 5