A25L16PMF-50 데이터 시트보기 (PDF) - AMIC Technology

부품명

상세내역

제조사

A25L16PMF-50

8 Mbit, Low Voltage, Serial Flash Memory With 50 MHz SPI Bus Interface

AMIC Technology 

A25L80P

Absolute Maximum Ratings*

Storage Temperature (TSTG) . . . . . . . . . . . . . -65°C to + 150°C

Lead Temperature during Soldering (Note 1)

Input and Output Voltage (with respect to Ground) (VID) . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.6V to +4.0V

Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . -0.6V to +4.0V

Electrostatic Discharge Voltage (Human Body model) (VESD)

(Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2000V to 2000V

Notes:

1. Compliant with JEDEC Std J-STD-020B (for small body,

Sn-Pb or Pb assembly).

2. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500Ω, R2=500

Ω)

*Comments

Stressing the device above the rating listed in the Absolute

Maximum Ratings" table may cause permanent damage to the

device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in

the Operating sections of this specification is not implied.

Exposure to Absolute Maximum Rating conditions for extended

periods may affect device reliability. Refer also to the AMIC

SURE Program and other relevant quality documents.

DC AND AC PARAMETERS

This section summarizes the operating and measurement

conditions, and the DC and AC characteristics of the device.

The parameters in the DC and AC Characteristic tables that

follow are derived from tests performed under the

Measurement Conditions summarized in the relevant tables.

Designers should check that the operating conditions in their

circuit match the measurement conditions when relying on the

quoted parameters.

Table 7. Operating Conditions

Symbol

Parameter

VCC

Supply Voltage

TA

Ambient Operating Temperature

Min.

Max.

Unit

2.7

3.6

V

–40

85

°C

Table 8. Data Retention and Endurance

Parameter

Condition

Erase/Program Cycles At 85°C

Data Retention

At 85°C

Note: 1. This is preliminary data

Min.

Max.

100,000

20

Unit

Cycles per sector

Years

Table 9. Capacitance

Symbol

Parameter

Test Condition

Min.

Max.

Unit

COUT

Output Capacitance (Q)

VOUT = 0V

CIN

Input Capacitance (other pins)

VIN = 0V

Note: Sampled only, not 100% tested, at TA=25°C and a frequency of 33 MHz.

8

pF

6

pF

PRELIMINARY (May 2005, Version 0.0)

24

AMIC Technology Corp.

Share Link: