AD8517 데이터 시트보기 (PDF) - Analog Devices
부품명
상세내역
제조사
AD8517 Datasheet PDF : 12 Pages
| |||
1
ABSOLUTE MAXIMUM RATINGS
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Input Voltage2 . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . ± 0.6 V
Internal Power Dissipation
SOT-23 (RT) . . . . . . . . . . . . See Thermal Resistance Chart
SOIC (R) . . . . . . . . . . . . . . . See Thermal Resistance Chart
µSOIC (RM) . . . . . . . . . . . . See Thermal Resistance Chart
Output Short-Circuit Duration
. . . . . . . . . . . . . . . . . . . . . . . . Indefinite for TA < +40°C
Storage Temperature Range
R, RM and RT Packages . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
AD8517, AD8527 . . . . . . . . . . . . . . . . . . –40°C to +125°C
Junction Temperature Range
R, RM and RT Packages . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . 300°C
AD8517/AD8527
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those listed in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2For supply voltages less than 6 V the input voltage is limited to less than or equal
to the supply voltage.
Package Type
5-Lead SOT-23 (RT)
8-Lead SOIC (R)
8-Lead µSOIC (RM)
JA1
JC
Unit
230
146
°C/W
158
43
°C/W
210
45
°C/W
NOTE
1θJA is specified for worst-case conditions, i.e., θJA is specified for device soldered
in circuit board for SOT-23 and SOIC packages.
Model
AD8517ART-REEL
AD8527AR
AD8527ARM-REEL
ORDERING GUIDE
Temperature
Range
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
Package
Description
5-Lead SOT-23
8-Lead SOIC
8-Lead µSOIC
Package
Option
RT-5
SO-8
RM-8
Branding
Information
ADA
AFA
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD8517/AD8527 features proprietary ESD protection circuitry, permanent dam-
age may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper
ESD precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
120
VS = 5V
VCM = 2.5V
TA = 25؇C
COUNT = 935 OP AMPS
90
60
30
0
؊4 ؊3 ؊2 ؊1
0
1
2
3
4
INPUT OFFSET VOLTAGE – mV
Figure 1. Input Offset Voltage Distribution
950
900
850
800
750
700
650
600
1
2
3
4
5
6
SUPPLY VOLTAGE – V
Figure 2. Supply Current per Amplifier vs. Supply Voltage
REV. B
–5–
Share Link: 