ADJD-E622-QR999 데이터 시트보기 (PDF) - Avago Technologies

부품명

상세내역

제조사

ADJD-E622-QR999

RGB Color Sensor in QFN Package

Avago Technologies 

Parameter

Saturation

Irradiance [5]

Saturation

Irradiance [5]

Saturation

Irradiance [5]

Saturation

Irradiance [5]

Saturation

Irradiance [5]

Saturation

Irradiance [5]

Output rise time

Output fall time

Sym. Remark

Min. Typ.

GS:101, λP = 460 nm [2] (Blue Channel)

0.67

GS:101, λP = 542 nm [3] (Green Channel)

0.43

GS:101, λP = 645 nm [4] (Red Channel)

0.29

GS:100, λP = 460 nm [2] (Blue Channel)

0.78

GS:100, λP = 542 nm [3] (Green Channel)

0.59

GS:100, λP = 645 nm [4] (Red Channel)

0.40

GS:011, λP = 460 nm [2] (Blue Channel)

0.94

GS: 011, λP = 542 nm [3] (Green Channel)

0.78

GS: 011, λP = 645 nm [4] (Red Channel)

0.53

GS:010, λP = 460 nm [2] (Blue Channel)

1.18

GS:010, λP = 542 nm [3] (Green Channel)

0.94

GS:010, λP = 645 nm [4] (Red Channel)

0.71

GS:001, λP = 460 nm [2] (Blue Channel)

1.57

GS:001, λP = 542 nm [3] (Green Channel)

1.18

GS:001, λP = 645 nm [4] (Red Channel)

0.85

GS:000, λP = 460 nm [2] (Blue Channel)

2.35

GS:000, λP = 542 nm [3] (Green Channel)

1.57

GS:000, λP = 645 nm [4] (Red Channel)

1.34

tr GS:000 to GS101 Test Condition: Refer to note [1]

45

(min Vo = 0V, peak Vo = 2V)

GS:110 to GS:111 Test Condition: Refer to note [1]

220

(min Vo = 0V, peak Vo = 2V)

tf GS:000 to GS101 Test Condition: Refer to note [1]

50

(min Vo = 0V, peak Vo = 2V)

GS:110 to GS:111 Test Condition: Refer to note [1]

240

(min Vo = 0V, peak Vo = 2V)

Max. Unit

mW/cm2

mW/cm2

mW/cm2

mW/cm2

mW/cm2

mW/cm2

µs

µs

µs

µs

Notes:

1. Test condition: The rise and fall time is measured with RC lowpass

filter added to sensor output:

2. Test condition: using blue diffuse light of peak wavelength (λP)

460nm and spectral half width (∆λ½) 25nm as light source.

3. Test condition: using green diffuse light of peak wavelength (λP)

542nm and spectral half width (∆λ½) 35nm as light source.

4. Test condition: using red diffuse light of peak wavelength (λP)

645nm and spectral half width (∆λ½) 20nm as light source.

5. Saturation irradiance = (Max output voltage swing)/(Irradiance

responsivity)

Remarks: For illustration purpose, only red channel is

shown. The same circuit applies to green and blue

channel.

Gain Selection

GS:000 to GS:101

GS:110 to GS:111

Signal Generator

LED

Rext

15kΩ

15kΩ

Cext

1nF

6.8nF

Color Sensor

R

C

Red Channel

VRout

RCLowpass Filter

Vout

Rext

Cext

Test Circuit

6

Share Link: