Package Drawings & Markings
Note(s) and/or Footnote(s):
1. Dimensioning and tolerancing conform to ASME Y14.5M-1994.
2. All dimensions are in millimeters, angle are in degrees.
3. Dimension b applies to metallized terminal and is measured between 0.25 and 0.30mm from terminal tip.
4. Dimension L1 represents terminal full back from package edge up to 0.15mm is acceptable.
5. Coplanarity applies to the exposed heat slug as well as the terminal.
6. Radius on terminal is optional.
7. N is the total number of terminals.
Figure 53:
Marking YYWWXZZ
YY
Pb-free; Year
WW
Manufacturing week
X
Plant Identifier
ZZ
Traceability code
@
Sublot Identifier
ams Datasheet, Confidential: 2013-Oct [3-02]
AS3909/AS3910 – 69