AT49BV163D 데이터 시트보기 (PDF) - Atmel Corporation
부품명
상세내역
제조사
AT49BV163D Datasheet PDF : 27 Pages
| |||
3. Block Diagram
AT49BV163D(T)
I/O0 - I/O15/A-1
OUTPUT
BUFFER
INPUT
BUFFER
A0 - A19
INPUT
BUFFER
ADDRESS
LATCH
Y-DECODER
X-DECODER
IDENTIFIER
REGISTER
STATUS
REGISTER
DATA
COMPARATOR
Y-GATING
MAIN
MEMORY
COMMAND
REGISTER
WRITE STATE
MACHINE
PROGRAM/ERASE
VOLTAGE SWITCH
CE
WE
OE
RESET
BYTE
RDY/BUSY
VCC
GND
4. Device Operation
4.1 Command Sequences
When the device is first powered on, it will be reset to the read or standby mode, depending
upon the state of the control line inputs. In order to perform other device functions, a series of
command sequences are entered into the device. The command sequences are shown in the
“Command Definition Table” on page 11 (I/O8 - I/O15 are don’t care inputs for the command
codes). The command sequences are written by applying a low pulse on the WE or CE input
with CE or WE low (respectively) and OE high. The address is latched on the falling edge of CE
or WE, whichever occurs last. The data is latched by the first rising edge of CE or WE. Standard
microprocessor write timings are used. The address locations used in the command sequences
are not affected by entering the command sequences.
4.2 Read
The AT49BV163D(T) is accessed like an EPROM. When CE and OE are low and WE is high,
the data stored at the memory location determined by the address pins are asserted on the
out-puts. The outputs are put in the high impedance state whenever CE or OE is high. This dual-
line control gives designers flexibility in preventing bus contention.
4.3 Reset
A RESET input pin is provided to ease some system applications. When RESET is at a logic
high level, the device is in its standard operating mode. A low level on the RESET input halts the
present device operation and puts the outputs of the device in a high impedance state. When a
high level is reasserted on the RESET pin, the device returns to the read or standby mode,
depending upon the state of the control inputs.
3
3590A–FLASH–12/05
Share Link: 