ATTINY13A 데이터 시트보기 (PDF) - Atmel Corporation

부품명

상세내역

제조사

ATTINY13A

8-bit Microcontroller with 1K Bytes In-System Programmable Flash

Atmel Corporation 

9. Datasheet Revision History

Please note that page numbers in this section refer to the current version of this document and

may not apply to previous versions.

9.1 Rev. 8126E – 07/10

1. Updated description in Section 6.4.2 “CLKPR – Clock Prescale Register” on page 28.

2. Adjusted notes in Table 18-1, “DC Characteristics, TA = -40°C to +85°C,” on page 117.

3. Updated plot order in Section 19. “Typical Characteristics” on page 124, added some

plots, also some headers and figure titles adjusted.

4. Updated Section 6. “Ordering Information” on page 11, added extended temperature

part numbers, as well tape & reel part numbers. Notes adjusted.

5. Updated bit syntax throughout the datasheet, e.g. from CS02:0 to CS0[2:0].

9.2 Rev. 8126D – 11/09

1. Added note “If the RSTDISPL fuse is programmed...” in Startup-up Times Table 6-5

and Table 6-6 on page 26.

2. Added addresses in all Register Description tables and cross-references to Register

Summary.

3. Updated naming convention for -COM bits in tables from Table 11-2 on page 70 to

Table 11-7 on page 72.

4. Updated value for tWD_ERASE in Table 17-8, “Minimum Wait Delay Before Writing the Next

Flash or EEPROM Location,” on page 108.

5. Added NiPdAU note for -SH and -SSH in Section 6. “Ordering Information” on page 11.

9.3 Rev. 8126C – 09/09

1. Added EEPROM errata for rev. G - H on page 17.

2. Added a note about topside marking in Section 6. “Ordering Information” on page 11.

9.4 Rev. 8126B – 11/08

1. Updated order codes on page 11 to reflect changes in material composition.

2. Updated sections:

– “DIDR0 – Digital Input Disable Register 0” on page 81

– “DIDR0 – Digital Input Disable Register 0” on page 95

3. Updated “Register Summary” on page 7.

9.5 Rev. 8126A – 05/08

1. Initial revision, created from document 2535I – 04/08.

2. Updated characteristic plots of section “Typical Characteristics” , starting on page 124.

3. Updated “Ordering Information” on page 11.

4. Updated section:

– “Speed” on page 118

5. Update tables:

– “DC Characteristics, TA = -40°C to +85°C” on page 117

– “Calibration Accuracy of Internal RC Oscillator” on page 119

18 ATtiny13A

8126ES–AVR–07/10

Share Link: