BD5446EFV 데이터 시트보기 (PDF) - ROHM Semiconductor
부품명
상세내역
제조사
BD5446EFV Datasheet PDF : 32 Pages
| |||
BD5446EFV
Technical Note
4)Output short protection(Short to the power supply)
This IC has the PWM output short protection circuit that stops the PWM output when the PWM output is short-circuited to
the power supply due to abnormality.
Detecting condition - It will detect when MUTE pin is set High and the current that flows in the PWM output pin
becomes 10A(TYP.) or more. The PWM output instantaneously enters the state of HiZ-Low if
detected, and IC does the latch.
Releasing method - ①After the MUTEX pin is set Low once, the MUTEX pin is set High again.
②Turning on the power supply again.
Short to VCC
Release from short to VCC
OUT1P (50, 51pin)
OUT1N (43, 44pin)
OUT2P (31, 32pin)
OUT2N (38, 39pin)
Over current
ERROR (24pin)
MUTEX（13pin）
10A(TYP.)
PWM out ： IC latches with HiZ-Low.
t
Released from latch state.
t
１μsec(TYP.)
t
Latch release
t
5) Output short protection(Short to GND)
This IC has the PWM output short protection circuit that stops the PWM output when the PWM output is short-circuited to
GND due to abnormality.
Detecting condition - It will detect when MUTE pin is set High and the current that flows in the PWM output terminal
becomes 10A(TYP.) or more. The PWM output instantaneously enters the state of HiZ-Low if
detected, and IC does the latch.
Releasing method – ①After the MUTEX pin is set Low once, the MUTEX pin is set High again.
②Turning on the power supply again.
Short to GND
Release from short to
GND
OUT1P (50, 51pin)
OUT1N (43, 44pin)
OUT2P (31, 32pin)
OUT2N (38, 39pin)
Over current
ERROR (24pin)
MUTEX(13pin)
10A(TYP.)
PWM out ： IC latches with HiZ-Low.
t
Released from latch state.
t
１μsec(TYP.)
t
Latch release
t
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
21/31
2011.06 - Rev.C
Share Link: 