DSPIC33FJ32GP202(2007) 데이터 시트보기 (PDF) - Microchip Technology

부품명

상세내역

제조사

DSPIC33FJ32GP202
(Rev.:2007)

High-Performance, 16-Bit Microcontrollers

Microchip Technology 

dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304

REGISTER 2-2: CORCON: CORE CONTROL REGISTER

U-0

—

bit 15

U-0

U-0

R/W-0

R/W-0

—

—

US

EDT(1)

R-0

R-0

DL<2:0>

R-0

bit 8

R/W-0

SATA

bit 7

R/W-0

SATB

R/W-1

SATDW

R/W-0

ACCSAT

R/C-0

IPL3(2)

R/W-0

PSV

R/W-0

RND

R/W-0

IF

bit 0

Legend:

R = Readable bit

0’ = Bit is cleared

C = Clear only bit

W = Writable bit

‘x = Bit is unknown

-n = Value at POR

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

bit 15-13

bit 12

bit 11

bit 10-8

bit 7

bit 6

bit 5

bit 4

bit 3

bit 2

bit 1

bit 0

Unimplemented: Read as ‘0’

US: DSP Multiply Unsigned/Signed Control bit

1 = DSP engine multiplies are unsigned

0 = DSP engine multiplies are signed

EDT: Early DO Loop Termination Control bit(1)

1 = Terminate executing DO loop at end of current loop iteration

0 = No effect

DL<2:0>: DO Loop Nesting Level Status bits

111 = 7 DO loops active

•

•

•

001 = 1 DO loop active

000 = 0 DO loops active

SATA: AccA Saturation Enable bit

1 = Accumulator A saturation enabled

0 = Accumulator A saturation disabled

SATB: AccB Saturation Enable bit

1 = Accumulator B saturation enabled

0 = Accumulator B saturation disabled

SATDW: Data Space Write from DSP Engine Saturation Enable bit

1 = Data space write saturation enabled

0 = Data space write saturation disabled

ACCSAT: Accumulator Saturation Mode Select bit

1 = 9.31 saturation (super saturation)

0 = 1.31 saturation (normal saturation)

IPL3: CPU Interrupt Priority Level Status bit 3(2)

1 = CPU interrupt priority level is greater than 7

0 = CPU interrupt priority level is 7 or less

PSV: Program Space Visibility in Data Space Enable bit

1 = Program space visible in data space

0 = Program space not visible in data space

RND: Rounding Mode Select bit

1 = Biased (conventional) rounding enabled

0 = Unbiased (convergent) rounding enabled

IF: Integer or Fractional Multiplier Mode Select bit

1 = Integer mode enabled for DSP multiply ops

0 = Fractional mode enabled for DSP multiply ops

Note 1: This bit will always read as ‘0’.

2: The IPL3 bit is concatenated with the IPL<2:0> bits (SR<7:5>) to form the CPU interrupt priority level.

DS70290A-page 18

Preliminary

© 2007 Microchip Technology Inc.

Share Link: