HN58V65A Series, HN58V66A Series
Toggle Bit
This device provide another function to determine the internal programming cycle. If the EEPROM is set
to read mode during the internal programming cycle, I/O6 will charge from “1” to “0” (toggling) for each
read. When the internal programming cycle is finished, toggling of I/O6 will stop and the device can be
accessible for next read or program.
Toggle Bit Waveform
Notes: 1. I/O6 begining state is “1”.
2. I/O6 ending state will vary.
3. See AC read characteristics.
4. Any address location can be used, but the address must be fixed.
Address
CE
tCE *3
Next mode
*4
WE
tOE*3
OE
tOEH
*1
I/O6
Din
Dout
Dout
tWC
*2
Dout
tOES
*2
Dout
tDW
Rev.3.00, Dec. 04.2003, page 18 of 26