IS25LD256C 데이터 시트보기 (PDF) - Integrated Silicon Solution

부품명

상세내역

제조사

IS25LD256C

256Kbit Single Operating Voltage Serial Flash Memory With 100 MHz Dual-Output SPI Bus Interface

Integrated Silicon Solution 

IS25LD256C

DEVICE OPERATION (CONTINUED)

RDSR COMMAND (READ STATUS REGISTER) OPERATION

The Read Status Register (RDSR) instruction provides

access to the Status Register. During the execution of

a program, erase or write status register operation, all

other instructions will be ignored except the RDSR

instruction, which can be used to check the progress or

completion of an operation by reading the WIP bit of

Status Register.

Figure 8. Read Status Register Sequence

SIO

WRSR COMMAND (WRITE STATUS REGISTER) OPERATION

The Write Status Register (WRSR) instruction allows

the user to enable or disable the block protection and

status register write protection features by writing “0”s

or “1” s into the volatile BP2, BP1, BP0 and SRWD

bits.

Figure 9. Write Status Register Sequence

SIO

Integrated Silicon Solution, Inc.- www.issi.com

16

Rev. A

09/11/2012

Share Link: