DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

NX25F080A 데이터 시트보기 (PDF) - NexFlash -> Winbond Electronics

부품명
상세내역
제조사
NX25F080A
NexFlash
NexFlash -> Winbond Electronics NexFlash
NX25F080A Datasheet PDF : 25 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
NX25F080A
Transfer SRAM to Program Buffer
The Transfer SRAM to Program Buffer command trans-
fers all 536 bytes from the SRAM to the Program Buffer at
one time without the clock sequencing required in the
Transfer Sector to SRAM command. This command can
be useful in applications where the SRAM and Program
Buffer are to be used independently of the Flash memory.
Effective use of the Transfer to SRAM or Program Buffer
commands allow the two 536-byte buffers to act as
1072-bytes of user SRAM. The command sequence is
similar to the Write or Read SRAM commands except that
Transfer SRAM to
Program Buffer
Command 16 Clocks
16 Clocks
16 Clocks
SI
92H
0000H
0000H
0000H
the sector address field S[15:0] and byte address B[15:0]
field are replaced with all 0 bits. After the last byte address
is transferred, the command is completed by issuing 16
control clocks and then asserting CS high. There is a
required delay time after CS is asserted high (see tXP
timing specification). During this time the data from the
SRAM is being transferred to the Program Buffer and
neither are available for use. Status of this operation can
be checked by testing the Transfer in Process bit (TR) in
the Status Register.
Transfer Time
(tXP)
SO
Read from Program Buffer Command
The Read from Program Buffer command (91H) provides
access to the 536-Byte Program Buffer. The command is
similar to the Read from Sector command except that the
sector address field S[15:0] is replaced with all 0 bits. This
command can be useful in applications where the SRAM
and Program Buffer are used independently of the Flash
memory. This command cannot be used while the device
is busy.
Read from
Program Buffer
Command 16 Clocks
SI
91H
0000H
Byte
Address*
B[15:0]
16 Clocks
0000H
SO
*The byte address only uses bits [9:0]
RB[15:0]
Read/Busy
Status
First Byte - Last Byte
Read Program Buffer Data
16
NexFlash Technologies, Inc.
PRELIMINARY NXSF005C-0699
06/11/99 ©

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]