L4995 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
L4995 Datasheet PDF : 35 Pages
| |||
Electrical specifications
2
Electrical specifications
L4995
2.1
Absolute maximum ratings
Stressing the device above the rating listed in the “Absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 3. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VVsdc
DC supply voltage
- 0.3 to 40
V
IVsdc
VVo(1)
Input current
DC output voltage
Internally limited
- 0.3 to 6
V
IVo
DC output current
Internally limited
VWi
Watchdog input voltage
-0.3 to VVo + 0.3
V
Vod
Res output voltage
-0.3 to VVo + 0.3
V
Iod
Res output current
Internally limited
Vcr
Vcr voltage
- 0.3 to VVo + 0.3
V
Vcw
Watchdog delay voltage
- 0.3 to VVo + 0.3
V
VEn
Enable input
- 0.3 to VVsdc +0.3 V
Tj
Junction temperature
- 40 to 150
C
VESD
ESD voltage level (HBM-MIL STD 883C)
±2
kV
VESD
ESD voltage level (CDM AEC-Q100-011)
750
V
1. Using the typical application schematic with Cout= 10 µF and Iout=0 A, when the regulator is switched-on,
an overshoot exceeding 6 V could occur.This behavior does not impact the reliability of the regulator.
8/35
Doc ID 13103 Rev 13
Share Link: 