LCX020 데이터 시트보기 (PDF) - Sony Semiconductor

부품명

상세내역

제조사

LCX020

1.8cm (0.7-inch) Color LCD Panel

Sony Semiconductor 

LCX020BK

Notes on Handling

(1) Static charge prevention

Be sure to take the following protective measures. TFT-LCD panels are easily damaged by static charges.

a) Use non-chargeable gloves, or simply use bare hands.

b) Use an earth-band when handling.

c) Do not touch any electrodes of a panel.

d) Wear non-chargeable clothes and conductive shoes.

e) Install conductive mats on the working floor and working table.

f) Keep panels away from any charged materials.

g) Use ionized air to discharge the panels.

(2) Protection from dust and dust

a) Operate in a clean environment.

b) When delivered, panel surface (Polarizer) is covered by a protective sheet. Peel off the protective sheet

carefully so as not to damage the panel.

c) Do not touch the polarizer surface. The surface is easily scratched. When cleaning, use a clean-room

wiper with isopropyl alcohol. Be careful not to leave a stain on the surface.

d) Use ionized air to blow dust off the polarizer.

(3) Other handling precautions

a) Do not twist or bend the flexible PC board especially at the connecting region because the board is

easily deformed.

b) Do not drop the panel.

c) Do not twist or bend the panel or panel frame.

d) Keep the panel away from heat sources.

e) Do not dampen the panel with water or other solvents.

f) Avoid storing or using the panel at a high temperature or high humidity, which may result in panel

damages.

– 23 –

Share Link: