NOT RECOMMENDED
FOR NEW DESIGN
PR3001G - PR3007G
3.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER
Features
• Glass Passivated Die Construction
• Fast Switching for High Efficiency
• Surge Overload Rating to 125A Peak
• Low Reverse Leakage Current
• Lead Free Finish, RoHS Compliant (Note 4)
Mechanical Data
• Case: DO-201AD
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020C
• Terminals: Finish ⎯ Tin. Plated Leads Solderable per
MIL-STD-202, Method 208
• Polarity: Cathode Band
• Marking: Type Number
• Ordering Information: See Page 3
• Weight: 1.12 grams (approximate)
DO-201AD
Dim
Min
Max
A
25.40
⎯
B
7.20
9.50
C
1.20
1.30
D
4.80
5.30
All Dimensions in mm
Maximum Ratings and Electrical Characteristics
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
@TA = 25°C unless otherwise specified
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage (Note 5)
Symbol
PR PR PR PR PR PR PR
3001G 3002G 3003G 3004G 3005G 3006G 3007G
Unit
VRRM
VRWM
50
100 200 400 600 800 1000 V
VR
RMS Reverse Voltage
VR(RMS)
35
70 140 280 420 560 700
V
Average Rectified Output Current
(Note 1)
@ TA = 55°C
IO
3.0
A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
IFSM
125
A
Forward Voltage
@ IF = 3.0A VFM
1.3
V
Peak Reverse Current
at Rated DC Blocking Voltage (Note 5)
@ TA = 25°C
@ TA = 125°C
IRM
5.0
100
μA
Reverse Recovery Time (Note 3)
trr
150
250
500
ns
Typical Total Capacitance (Note 2)
CT
50
pF
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
RθJA
Tj, TSTG
32
-65 to +150
°C/W
°C
Notes:
1. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A. See figure 5.
4. RoHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7.
5. Short duration pulse test used to minimize self-heating effect.
DS27003 Rev. 7 - 3
1 of 3
www.diodes.com
PR3001G - PR3007G
© Diodes Incorporated