M52055P 데이터 시트보기 (PDF) - Renesas Electronics

부품명

상세내역

제조사

M52055P

3-Channel Analog Switch

Renesas Electronics 

M52055P

USAGE NOTES

1. The input impedance is 20 kΩ (standard value).

2. Output drive current should be 5 mA or less when using this IC.

3. Note that voltage applied to the control pins (pins 2, 7 and 12) should be less than the power supply voltage (Vcc)

and more than the ground voltage (GND). The following shows an internal equivalent circuit coupled to a control

pin.

4. Output pins are the emitter follower type. The following drive current is applied inside the IC normally. If the drive

performance is insufficient, apply external drive current within the range shown in 2.

Power supply voltage (Vcc)

5V

9V

12 V

Drive current in the IC (standard value)

190 µA

380 µA

530 µA

Rev.1.0, Sep.22.2003, page 12 of 13

Share Link: