MITSUBISHI SEMICONDUCTORS
M63023/024/026/027FP
SPINDLE MOTOR AND 5CH ACTUATOR driveR
FG function at SPINDLE drive
The FG terminal outputs the square pulse signal sy nchronizing with the Hall inputs timing.
And, the FG terminal is open-collector output.
Phase delay circuit at SLIDE
Phase delay circuit is built in the IC to detect an output spike current, when the motor current
direction is switching.
In switching the motor current direction, Phase delay circuit switch-of f all output trangister of H -
bridge f or 3usec.
Output current setting at SLIDE
In this IC, since output tranjister is NPN-ty pe tranjister, motor coil current (Io) is larger than
sensing resistance current about 10mA (TYP.) according to base current of output tranjister.
Theref ore please design output current with consisting these base current.
( 14 / 17)
REV010307