ML66525 데이터 시트보기 (PDF) - Oki Electric Industry

부품명

상세내역

제조사

ML66525

16-Bit Microcontroller

Oki Electric Industry 

OKI Semiconductor

FEDL66525-02

ML66525 Family

–

5 kΩ

+

AI0

Analog input

AI1

0.1 µF

to

AI3

Cross talk is the difference

between the A/D conversion

results when the same

analog input is applied to

AI0 through AI3 and the A/D

conversion results of the

circuit to the left.

VREF or AGND

Measurement Circuit 2

Definition of Terminology

1. Resolution

Resolution is the value of minimum discernible analog input.

With 10 bits, since 210 = 1024, resolution of (VREF – AGND) ÷ 1024 is possible.

2. Linearity error

Linearity error is the difference between ideal conversion characteristics and actual conversion characteristics

of a 10-bit A/D converter (not including quantization error).

Ideal conversion characteristics can be obtained by dividing the voltage between VREF and AGND into 1024

equal steps.

3. Differential linearity error

Differential linearity error indicates the smoothness of conversion characteristics. Ideally, the range of analog

input voltage that corresponds to 1 converted bit of digital output is 1LSB = (VREF – AGND) ÷ 1024.

Differential error is the difference between this ideal bit size and bit size of an arbitrary point in the conversion

range.

4. Zero scale error

Zero scale error is the difference between ideal conversion characteristics and actual conversion characteristics

at the point where the digital output changes from 000H to 001H.

5. Full-scale error

Full-scale error is the difference between ideal conversion characteristics and actual conversion characteristics

at the point where the digital output changes from 3FEH to 3FFH.

23/27

Share Link: