DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MPC7457EC 데이터 시트보기 (PDF) - Freescale Semiconductor

부품명
상세내역
제조사
MPC7457EC
Freescale
Freescale Semiconductor Freescale
MPC7457EC Datasheet PDF : 71 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Electrical and Thermal Characteristics
Table 2. Absolute Maximum Ratings 1
Characteristic
Symbol Maximum Value Unit Notes
Core supply voltage
VDD
–0.3 to 1.60
V
2
PLL supply voltage
AVDD
–0.3 to 1.60
V
2
Processor bus supply voltage
BVSEL = 0
OVDD
–0.3 to 1.95
V
3, 4
BVSEL = HRESET or OVDD
OVDD
–0.3 to 2.7
V
3, 5
L3 bus supply voltage
L3VSEL = ¬HRESET
GVDD
–0.3 to 1.65
V
3, 6
L3VSEL = 0
GVDD
–0.3 to 1.95
V
3, 7
L3VSEL = HRESET or GVDD
GVDD
–0.3 to 2.7
V
3, 8
Input voltage
Processor bus
Vin
–0.3 to OVDD + 0.3
V
9, 10
L3 bus
Vin
–0.3 to GVDD + 0.3
V
9, 10
JTAG signals
Vin
–0.3 to OVDD + 0.3
V
Storage temperature range
Tstg
–55 to 150
°C
Notes:
1. Functional and tested operating conditions are given in Table 4. Absolute maximum ratings are stress ratings only, and
functional operation at the maximums is not guaranteed. Stresses beyond those listed may affect device reliability or cause
permanent damage to the device.
2. Caution: VDD/AVDD must not exceed OVDD/GVDD by more than 1.0 V during normal operation; this limit may be exceeded
for a maximum of 20 ms during power-on reset and power-down sequences.
3. Caution: OVDD/GVDD must not exceed VDD/AVDD by more than 2.0 V during normal operation; this limit may be exceeded
for a maximum of 20 ms during power-on reset and power-down sequences.
4. BVSEL must be set to 0, such that the bus is in 1.8-V mode.
5. BVSEL must be set to HRESET or 1, such that the bus is in 2.5-V mode.
6. L3VSEL must be set to ¬HRESET (inverse of HRESET), such that the bus is in 1.5-V mode.
7. L3VSEL must be set to 0, such that the bus is in 1.8-V mode.
8. L3VSEL must be set to HRESET or 1, such that the bus is in 2.5-V mode.
9. Caution: Vin must not exceed OVDD or GVDD by more than 0.3 V at any time including during power-on reset.
10.Vin may overshoot/undershoot to a voltage and for a maximum duration as shown in Figure 2.
Figure 2 shows the undershoot and overshoot voltage on the MPC7457.
MPC7457 RISC Microprocessor Hardware Specifications, Rev. 8
12
Freescale Semiconductor

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]