OPI123 데이터 시트보기 (PDF) - Optek Technology
부품명
상세내역
제조사
OPI123 Datasheet PDF : 3 Pages
| |||
Optically Coupled Isolator
OPI120, OPI123
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
Operating Temperature
Input-to-Output Isolation Voltage(1)(2)
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(3)
Input Diode
Forward DC Current(4)
Reverse DC Voltage
Power Dissipation(5)
Output Photosensor
Collector-Emitter Voltage
OPI120
OPI123
Emitter-Collector Voltage
Collector-Base Voltage
OPI120
Power Dissipation(6)
-55° C to +125° C
-55° C to +100° C
± 15 kVDC
260° C
150 mA
3V
200 mW
25 V
20 V
5V
25 V
250 mW
Notes:
(1) Measured with input and output leads shorted in air with a maximum relative humidity of 50%. If suitably encapsulated or oil-
immersed, the isolation voltage is increased to 25 kV minimum.
(2) UL recognition is for 3750 VAC to 100° C.
(3) RMA flux is recommended. The duration can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 2.0 mA/°C above 25°C.
(5) Derate linearly 2.67 mA/°C above 25°C.
(6) Derate linearly 3.33 mA/°C above 25°C.
OPI120
1
5
4 - Base
2
3
OPI123
1
5
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
4—Not Connected
2
3
Pin #
1
2
LED
Anode
Cathode
Pin #
3
4
5
Transistor
Emitter
Base
Collector
Pin #
3
4
5
Darlington
Emitter
Open
Collector
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A .2 04/08
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 