S-817A11ANB-CUA-T2 데이터 시트보기 (PDF) - Seiko Instruments Inc

부품명

상세내역

제조사

S-817A11ANB-CUA-T2

SUPER-SMALL PACKAGE CMOS VOLTAGE REGULATOR

Seiko Instruments Inc 

Rev.3.0_00

SUPER-SMALL PACKAGE CMOS VOLTAGE REGULATOR

S-817 Series

The S-817 Series can be configured as a constant current circuit. Refer to Figure 15 and 16.

Constant amperage (IO) is calculated using the following equation (VOUT(E): Effective output voltage):

IO = (VOUT(E) ÷ RL) +ISS.

Please note that it is impossible to set constant amperage IO in case of circuit (1) of Figure 15 to the

value exceeding the drive ability of the S-817.

However, circuit (2) of Figure 16 is an example to set constant amperage to the value exceeding the

drive ability of the S-817. Circuit (2) incorporates a current boosting circuit. The maximum input voltage

of the constant current circuit is the value obtained by adding 10 V to voltage of the device (VO). It is not

recommended to attach a capacitor between the S-817 power source VIN and VSS pin or between

output VOUT and VSS pin because rush current flows at powering on. An example of input voltage

between VIN and VO in circuit (2) vs. IO current characteristics

VIN, VO pins, Input voltage - IO current

S-817A11ANB, S-817B11AMC, Tr : 2SK1213Y, R1 : 1 kΩ, VO=2 V

0.60

RL=1.83 Ω

0.50

2.2 Ω

0.40

2.75 Ω

0.30

3.67 Ω

5.5 Ω

0.20 11 Ω

0.10

0.00

1.4

1.6

1.8

2

VIN−VO(V)

2.2

2.4

Seiko Instruments Inc.

17

Share Link: