MX29LV008BTC-70 데이터 시트보기 (PDF) - Macronix International

부품명

상세내역

제조사

MX29LV008BTC-70

8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY

Macronix International 

CHIP UNPROTECT

The MX29LV008T/B also features the chip unprotect

mode, so that all sectors are unprotected after chip

unprotect is completed to incorporate any changes in the

code. It is recommended to protect all sectors before

activating chip unprotect mode.

To activate this mode, the programming equipment must

force VID on control pin OE and address pin A9. The CE

pins must be set at VIL. Pins A6 must be set to VIH.

Refer to chip unprotect algorithm and waveform for the

chip unprotect algorithm. The unprotection mechanism

begins on the falling edge of the WE pulse and is

terminated on the rising edge.

It is also possible to determine if the chip is unprotected

in the system by writing the Read Silicon ID command.

Performing a read operation with A1=VIH, it will produce

00H at data outputs(Q0-Q7) for an unprotected sector.

It is noted that all sectors are unprotected after the chip

unprotect algorithm is completed.

MX29LV008T/B

P/N:PM0718

REV. 1.0, JUL. 31, 2001

18

Share Link: