ST7533 데이터 시트보기 (PDF) - Sitronix Technology Co., Ltd.
부품명
상세내역
제조사
ST7533 Datasheet PDF : 60 Pages
| |||
ST7533
PIN DESCRIPTIONS
Power Supply Pins
Pin Name I/O
Function
No. of Pins
VDD
Power
Supply
Shared with the MPU power supply terminal Vcc.
12
VSS
Power
Supply
This is a 0V terminal connected to the system GND.
9
VSS2
Power This is the reference power supply for the step-up voltage circuit for the
Supply liquid crystal drive.
2
VRS
Power This is the internal-output VREG power supply for the LCD power supply
Supply voltage regulator.
1
This is a multi-level power supply for the liquid crystal drive. The voltage Supply
applied is determined by the liquid crystal cell, and is changed through the use of
a resistive voltage divided or through changing the impedance using an op. amp.
Voltage levels are determined based on VDD, and must maintain the relative
magnitudes shown below.
VDD (= V0) ≧V1 ≧V2 ≧V3 ≧V4 ≧V5
V1, V2,
V3, V4,
V5
Power
Supply When the power supply turns ON, the internal power supply circuits produce the
V1 to V4 voltages shown below. The voltage settings are selected using the LCD
10
bias set command.
1/33 DUTY 1/17 DUTY
V1 1/6*V5,1/5*V5 1/6*V5,1/5*V5
V2 2/6*V5,2/5*V5 2/6*V5,2/5*V5
V3 4/6*V5,3/5*V5 4/6*V5,3/5*V5
V4 5/6*V5,4/5*V5 5/6*V5,4/5*V5
LCD Power Supply Pins
Pin Name I/O
Function
CAP1+
CAP1–
CAP2+
CAP2–
CAP3–
VOUT
VR
O
DC/DC voltage converter. Connect a capacitor between this terminal and
the CAP1- terminal.
O
DC/DC voltage converter. Connect a capacitor between this terminal and
the CAP1+ terminal.
O
DC/DC voltage converter. Connect a capacitor between this terminal and
the CAP2- terminal.
O
DC/DC voltage converter. Connect a capacitor between this terminal and
the CAP2+ terminal.
O
DC/DC voltage converter. Connect a capacitor between this terminal and
the CAP1+ terminal.
O
DC/DC voltage converter. Connect a capacitor between this terminal and
VSS.
Output voltage regulator terminal. Provides the voltage between VDD and
I
V5 through a resistive voltage divider.
IRS = “L” : the V5 voltage regulator internal resistors are not used .
IRS = “H” : the V5 voltage regulator internal resistors are used .
No. of Pins
2
2
2
2
2
2
2
Ver 1.0
8/60
2003/07/21
Share Link: 