ST8012
NOTE
2001.12/19 Modify the booster capacity
2002 1/8 Modify the serial command interface-timing block (p16)
2002 1/14 Modify the Register command code
2002 1/17 Modify the Reset Register command defined
2002 1/23 Modify the pin description defined and command interface unused mode (p17)
2002 2/22 Modify the Booster circuit diagram (p19)
2002 2/22 Modify the Mix Mode table(p10)、add the serial interface timing(p33、p34)、add pad
data(p37)
2002 2/22 Modify the CS SET (p34)
2002/3/20 Modify the serial interface, when in the serial interface the d0data.and add the AC
direction.
2002/4/3 Modify the pad location (P39)
2002/06/04 Modify the XREST ACTIVE (p2)
2002/06/010 Modify the Chip Size (P37)
2002/06/21 Modify common and segment mode pin description (P6~P8)
2002/07/01 Modify booster circuit (P20)
2002/07/09 Command interface unused mode (use the default value)(P18)
2002/10/14 Delete the software reset and cog package , add the regulator liner line , delete some
AC application.
2002/11/22 Modify the booster frequency V1.1A
2003/03/31 Modify booster turns off command (p28)
2003/04/04 Add the XCS used math.
2003/4/17 Modify the Application circuit
2003/6/17 Add Application circuit V1.3
2003/11/12 Add Pin Pitch value V1.4
2004/04/05 Add application timing block V1.5
2004/09/08 Define timing(tLSW) of Segment Mode. P33~P35 V1.6
The above information is the exclusive intellectual property of Sitronix Technology Corp. and shall not be disclosed, distributed or reproduced without
permission from Sitronix.
V1.6
47/47
2004/09/08