STA33013TR 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STA33013TR

2.0 digital audio processor with FFX digital modulator and analog and digital inputs

STMicroelectronics 

Digital processing

5

Digital processing

STA330

The STA330 processor block is a digital block providing two channels of audio processing

and channel-mapping capability.

5.1

Signal processing flow

I2S or stereo ADC data can be selected. The I2S frequency range is from 8 kHz to 192 kHz.

ADC sampling frequency can be selected from 8 kHz to 48 kHz.

5.2

I2C interface disabled

When pin I2CDIS = 1, the SDA, SCL, LRCLKO and BICLKO pins can be pulled high or low

to change certain parameters of operation.

" SDA = 0: FFX input comes from ADC

SDA = 1: FFX input comes from digital audio interface

" SCL = 0: binary output mode (binary soft start/stop enabled)

SCL = 1: phase shift output mode

" LRCLKO = 0: no volume change

LRCLKO = 1: volume up

" BICLKO = 0: no volume change

BICLKO = 1: volume down

At power-up, the master volume is set to -60 dB. When holding pin LRCLKO = 1 and pin

BICLKO = 1 simultaneously, the master volume is set to 0 dB. A high pulse on pin LRCLKO

causes a master volume change of +0.5 dB and a high pulse on pin BICLKO causes a

master volume change of -0.5 dB.

14/55

Share Link: