K305(2004) 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
K305 Datasheet PDF : 21 Pages
| |||
TSH350
Absolute Maximum Ratings
1 Absolute Maximum Ratings
Table 1: Key parameters and their absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Toper
Tstg
Tj
Rthja
Rthjc
Pmax
ESD
Supply Voltage 1
Differential Input Voltage2
Input Voltage Range3
Operating Free Air Temperature Range
Storage Temperature
Maximum Junction Temperature
Thermal Resistance Junction to Ambient
SOT23-5
SO8
Thermal Resistance Junction to Ambient
SOT23-5
SO8
Maximum Power Dissipation4 (@Ta=25°C) for Tj=150°C
SOT23-5
SO8
HBM : Human Body Model 5 (pins 1, 4, 5, 6, 7 and 8)
HBM : Human Body Model (pins 2 and 3)
MM : Machine Model 6 (pins 1, 4, 5, 6, 7 and 8)
MM : Machine Model (pins 2 and 3)
CDM : Charged Device Model (pins 1, 4, 5, 6, 7 and 8)
CDM : Charged Device Model (pins 2 and 3)
Latch-up Immunity
6
+/-0.5
+/-2.5
-40 to + 85
-65 to +150
150
250
150
80
28
500
830
2
0.5
200
60
1.5
1.5
200
V
V
V
°C
°C
°C
°C/W
°C/W
mW
kV
kV
V
V
kV
kV
mA
1) All voltages values are measured with respect to the ground pin.
2) Differential voltage are non-inverting input terminal with respect to the inverting input terminal.
3) The magnitude of input and output voltage must never exceed VCC +0.3V.
4) Short-circuits can cause excessive heating. Destructive dissipation can result from short circuit on amplifiers.
5) Human body model, 100pF discharged through a 1.5kΩ resistor into pMin of device.
6) This is a minimum Value. Machine model ESD, a 200pF cap is charged to the specified voltage, then discharged directly into the IC with
no external series resistor (internal resistor < 5Ω), into pin to pin of device.
Table 2: Operating conditions
Symbol
Parameter
VCC
Vicm
Supply Voltage 1
Common Mode Input Voltage
1) Tested in full production at 5V (±2.5V) supply voltage.
Value
Unit
4.5 to 5.5
V
-Vcc+1.5V to +Vcc-1.5V
V
2/21
Share Link: 