UPC8126K-E1 데이터 시트보기 (PDF) - NEC => Renesas Technology

부품명

상세내역

제조사

UPC8126K-E1

900 MHz BAND DIRECT QUADRATURE MODULATOR IC FOR DIGITAL MOBILE COMMUNICATION SYSTEMS

NEC => Renesas Technology 

µPC8126K

NOTE ON CORRECT USE

(1) Observe precautions for handling because of electrostatic sensitive devices.

(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired operation).

(3) Keep the track length between the ground pins as short as possible.

(4) Connect a bypass capacitor (example 1 000 pF) to the VCC pin.

RECOMMENDED SOLDERING CONDITIONS

This product should be soldered under the following recommended condition. For soldering methods and

conditions other than those recommended below, contact your NEC sales representative.

Soldering Method

Soldering Conditions

Infrared Reflow

Partial Heating

Package peak temperature: 235°C or below

Time: 30 seconds or less (at 210°C)

Count: 2, Exposure limitNote: None

Pin temperature: 300°C

Time: 3 seconds or less (per side of device)

Exposure limitNote: None

Recommended Condition

Symbol

IR35-00-2

–

Note After opening the dry pack, keep it in a place below 25°C and 65% RH for the allowable storage period.

Caution Do not use different soldering methods together (except for partial heating).

For details of recommended soldering conditions for surface mounting, refer to information document

SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).

Preliminary Data Sheet P13488EJ1V0DS00

17

Share Link: