UPD75236GJ 데이터 시트보기 (PDF) - NEC => Renesas Technology

부품명

상세내역

제조사

UPD75236GJ

4-BIT SINGLE-CHIP MICROCOMPUTER

NEC => Renesas Technology 

µPD75236

(1) Carry flag (CY)

The carry flag is a 1-bit flag to store the overflow and underflow generate information when a carry

operation instruction (ADDC, SUBC) is executed.

It has the bit accumulator function to execute Boolean algebraic operations with the data memory

specified by the bit address and to store the result.

Carry flag manipulation is carried out using a dedicated instruction irrespective of other PSW bits.

When RESET signal is generated, the carry flag becomes undefined.

Table 3-3 Carry Flag Manipulation Instructions

Instruction (Mnemonic)

Carry flag manipu-

lation dedicated

instruction

SET1 CY

CLR1 CY

NOT1 CY

SKT CY

Carry Flag Operation and Processing

CY set (1)

CY clear (0)

CY contents invert

SKip if CY contents are 1

Bit transfer

instruction

MOV1 mem* .bit CY

MOV1 CY, mem* .bit

CY contents transfer to the specified bit

Specified bit contents transfer to CY

Bit Boolean

instruction

AND1 CY, mem* .bit

OR1 CY, mem* .bit

XOR1 CY, mem* .bit

Specified bit contents ANDed/ORed/XORed with CY contents and

the results set to CY

Interrupt service

During interrupt execution

Parallel save of other PSW bits and 8 bits to the stack memory

---------------------------------------------------------------------------------------------------------------------------------------------------

RETI

Restore from the stack memory in parallel to other PSW bits

Remarks

mem*.bit indicates the following three bit manipulated addressing operations.

• fmem.bit

• pmem.@L

• @H + mem.bit

(2) Skip flags (SK2, SK1, SK0)

The skip flag is used to store the skipped state and is automatically set/reset when the CPU executes an

instruction.

The user cannot directly operate the skip flags as operands.

37

Share Link: