25Q32VFIG 데이터 시트보기 (PDF) - Winbond

부품명

상세내역

제조사

25Q32VFIG

32M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

Winbond 

W25Q32V

10.2.10 Fast Read Dual Output (3Bh)

The Fast Read Dual Output (3Bh) instruction is similar to the standard Fast Read (0Bh) instruction except

that data is output on two pins; IO0 and IO1. This allows data to be transferred from the W25Q32V at

twice the rate of standard SPI devices. The Fast Read Dual Output instruction is ideal for quickly

downloading code from Flash to RAM upon power-up or for applications that cache code-segments to

RAM for execution.

Similar to the Fast Read instruction, the Fast Read Dual Output instruction can operate at the highest

possible frequency of FR (see AC Electrical Characteristics). This is accomplished by adding eight

“dummy” clocks after the 24-bit address as shown in figure 10. The dummy clocks allow the device's

internal circuits additional time for setting up the initial address. The input data during the dummy clocks

is “don’t care”. However, the IO0 pin should be high-impedance prior to the falling edge of the first data

out clock.

Figure 10. Fast Read Dual Output Instruction Sequence Diagram

- 24 -

Share Link: