25Q80BW 데이터 시트보기 (PDF) - Winbond

부품명

상세내역

제조사

25Q80BW

1.8V 8M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

Winbond 

W25Q80BW

8.2.7 Write Disable (04h)

The Write Disable instruction (Figure 6) resets the Write Enable Latch (WEL) bit in the Status Register to

a 0. The Write Disable instruction is entered by driving /CS low, shifting the instruction code “04h” into the

DI pin and then driving /CS high. Note that the WEL bit is automatically reset after Power-up and upon

completion of the Write Status Register, Erase/Program Security Registers, Page Program, Quad Page

Program, Sector Erase, Block Erase and Chip Erase instructions.

Write Disable instruction can also be used to invalidate the Write Enable for Volatile Status Register

instruction.

Figure 6. Write Disable Instruction Sequence Diagram

- 21 -

Publication Release Date: January 26, 2011

Preliminary - Revision A

Share Link: