HFBR-5104 데이터 시트보기 (PDF) - HP => Agilent Technologies

부품명

상세내역

제조사

HFBR-5104

FDDI, 100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style

HP => Agilent Technologies 

Applications Support

Materials

Contact your local Hewlett-

Packard Component Field Sales

Office for information on how to

obtain PCB layouts, test boards

and demo boards for the 1x9

transceivers.

Evaluation Kits

Hewlett-Packard has available

three evaluation kits for the 1x9

transceivers. The purpose of

these kits is to provide the neces-

sary materials to evaluate the

performance of the HFBR-510X

family in a pre-existing 1x13 or

2x11 pinout system design

configuration or when connec-

tored to various test equipment.

1. HFBR-0305 - ATM

Evaluation Kit

This kit consists of one HFBR-

5205, one 1x13 to 1x9 pinout

adapter card, and one three

meter duplex SC to duplex ST

5

HFBR-5103/-5104/-5105

SERIES

4

3

2.5 x 10-10 BER

2

1.0 x 10-12 BER

1

connectored 62.5/125 µm fiber

optic cable.

2. HFBR-0303 - FDDI

Evaluation Kit

This kit consists of one HFBR-

5103, one 2x11 to 1x9 pinout

adapter card, one 1x13 to 1x9

pinout adapter card, and one

three meter duplex SC to MIC/

Receptacle connectored 62.5/

125 µm fiber optic cable.

3. HFBR-0319 Evaluation Test

Fixture Board

This test fixture converts +5 V

ECL 1x9 transceivers to –5 V

ECL BNC coax connections so

that direct connections to

industry standard fiber optic

test equipment can be

accomplished.

Accessory Duplex SC Con-

nectored Cable Assemblies

Hewlett-Packard recommends for

optimal coupling the use of

flexible-body duplex SC connec-

tored cable. Hewlett-Packard

offers two such compatible

Duplex SC connectored jumper

cable assemblies to assist you in

the evaluation of these trans-

ceiver products. These cables

may be purchased from HP with

the following part numbers.

1. HFBR-BKD001

A duplex cable 1 meter long

assembled with 62.5/125 µm

fiber and Duplex SC connector

plugs on both ends.

2. HFBR-BKD010

A duplex cable 10 meters long

assembled with 62.5/125 µm

fiber and Duplex SC connector

plugs on both ends.

Accessory Duplex ST

Connectored Cable

Assemblies

Hewlett-Packard recommends the

use of Duplex Push-Pull

connectored cable for the most

repeatable optical power coupling

performance.

Hewlett-Packard offers two such

compatible Duplex Push-Pull ST

connectored jumper cable

assemblies to assist you in your

evaluation of these products.

These cables may be purchased

from HP with the following part

numbers.

0

-4 -3 -2 -1 0 1 2 3 4

EYE SAMPLING TIME POSITION (ns)

CONDITIONS:

1.TA = 25° C

2. VCC = 5 Vdc

3. INPUT OPTICAL RISE/FALL TIMES = 1.0/2.1 ns.

4. INPUT OPTICAL POWER IS NORMALIZED TO

CENTER OF DATA SYMBOL.

5. NOTE 20 AND 21 APPLY.

Figure 11. Relative Input Optical Power vs. Eye

Sampling Time Position.

1. HFBR-XXX001

A duplex cable 1 meter long,

assembled with 62.5/125 µm

fiber and Duplex Push-Pull ST

connector plugs on both ends.

2. HFBR-XXX010

A duplex cable 10 meters long

assembled with 62.5/125 µm

fiber and Duplex Push-Pull ST

connector plugs on both ends.

137

Share Link: